Check out the new Vandy Vape BSKR Elite Kit, developed in collaboration with Youtube reviewer Alex from VapersMD. The new mod was endowed with a laconic cylindrical body with a minimum of decor and an ergonomic silhouette.

The choice of colors was limited to three duty options - black, gray and silver. An oval activation button with a built-in three-color indicator was installed on top. There is a USB port on the back. A screw-on cover was screwed to the bottom, which is responsible for access to the battery compartment.

The connector was supplemented with a knurled air ring for tightening adjustment. In addition, they provided a removable 510 format landing pad for conventional tanks and RDAs with a landing of 22 mm.

The universal device provides a standard security system and a maximum output voltage of 3.6 volts. Power is supplied by an external 18650 battery. The charge level is displayed in green, orange and red as it decreases. USB Type-C is responsible for charging with a current of 1A. The resistance can vary from 0.2 to 3.0 ohms.

The complete tank is fixed on the device by means of the bayonet system - half a turn. The volume of the reservoir is 3 or 2 ml, depending on the kit version. Filling holes are located at the top, under a removable cover.

In stock, two replaceable grid evaporators from the VVC Coil series are provided. The intensity of tight blowing is adjusted using a ring with four small round perforations. In addition to everything, the fitted delrin drip tip can be replaced with a soft filter imitating a cigarette.

Main characteristics:

• Size - 140 by 22 mm
• Power - 1x18650
• Charging current 1A
• Maximum voltage - 3.6 volts
• Resistance 0.2 to 3.0 ohm
• Tank volume - 3/2 ml

Each set contain:

• 1pc BSKR Elite Kit
• 1pc 510 Adapter
• 3pc SVF-Soft vape filter
• 2pc VVC Coil
• 1pc Instruction Manual
• 1pc QC TYPE-C USB Cable
• 1pc Spare Parts Bag